Service Panels | Power King

⚡ Professional Breaker Panel Services – Upgrades, Repairs & Safety

Your electrical panel is the heart of your property's power infrastructure. As licensed electrical contractors, we diagnose, repair, and upgrade electrical panels and subpanels to ensure your system meets current building codes, safely handles modern high-amperage appliances, and permanently eliminates dangerous electrical fire hazards.

💰 Electrical Panel Service Menu

Individual Circuit Breaker Replacement | $150 – $250 per breaker

Replace faulty, buzzing, overheating, or frequently tripping breakers to restore safe power delivery to your individual room lines.

Best For: Panels with a single breaker that is hot to the touch, won’t reset, makes a humming sound, or shows visible signs of heat degradation or scorch marks.
Included Labor: Full panel safety inspection; isolating the main incoming power feeds; removing the failing breaker; testing terminal wire insulation; cleaning bus bar contact points; installing a premium, code-compliant replacement breaker (Standard, AFCI, or GFCI as mandated by local code); torque-testing terminal lugs to exact specification; and load verification.
🚨 Scope Note: Pricing includes replacing a single pre-existing breaker element only. It does not include running new circuit wires. If a breaker will not reset due to faulty wiring or a short-circuit within the lines—rather than a broken breaker mechanism—this requires advanced diagnostic tracking. Please see our dedicated Troubleshooting page for diagnostic rates.

Electrical Panel Repair & Tune-Up | $350 – $1,500

Rehabilitate your existing service panel by correcting loose terminations, replacing compromised interior parts, and restoring reliable physical connections.

Best For: Older panels with flickering lights, loose neutral connections, corroded grounding bars, or panels requiring the replacement of damaged main lugs or scorched bus bars.
Included Labor: Coordinating a localized power shutdown with your local utility company; completely shutting down main service power; total disassembly of the interior panel components to extract and replace degraded copper or aluminum bus bars; tracing systemic neutral and ground integrity; replacing worn terminal blocks or neutral bars; tightening all internal lugs to code-mandated torque values; and rebalancing phase loads across the panel.
🚨 Scope Note: Pricing includes repairing and tuning existing panel components only. It does not include swapping out the entire outer panel enclosure or running brand-new circuits. If a new circuit run back to the breaker panel is required, please see the New Circuit Run line item below.

Subpanel Installation or Replacement | $600 – $1,500

Establish a secondary electrical distribution hub to neatly manage multi-circuit power demands in specialized areas of your property.

Best For: Detached garages, home workshops, master suite additions, finished basements, and pooling outdoor equipment lines into a central local hub.
Included Labor: Surface or flush-mounting a premium NEMA 1 or weatherproof NEMA 3R subpanel enclosure (typically 60A to 120A capacity); installing a main subpanel isolation breaker; mounting local ground and isolated neutral bars; terminating thick feeder lines; and setting up the internal circuit distribution tracks.
🚨 AFCI & Existing Wiring Disclaimer: National Electrical Code (NEC) building codes often require upgrading to modern Arc-Fault Circuit Interrupter (AFCI) breakers during a subpanel installation. Pre-existing, hidden wiring issues in older sections of the home—such as shared neutrals, bootleg grounds, knob-and-tube decay, or crowded junction boxes—frequently cause these ultra-sensitive safety breakers to experience nuisance tripping. Correcting or rewiring these pre-existing home wiring errors requires separate diagnostic and repair fees; we are not liable for pre-existing legacy wiring conditions.
🚨 Scope Note: Pricing includes mounting and terminating the subpanel hardware box only. It does not include running the heavy-gauge feeder circuit wires back to the primary main breaker panel. If a new circuit run back to the breaker panel is required, please see the New Circuit Run line item below.

Main Electrical Panel Upgrade & Replacement | $2,500 – $5,500+

Completely replace your outdated, hazardous, or maxed-out electrical panel with a brand-new, high-capacity, code-compliant service panel.

Best For: Properties with old, dangerous panels (like Federal Pacific, Zinsco, or old fuse boxes), homes upgrading from 100A to 200A service to accommodate EV chargers/heat pumps, or panels completely out of physical breaker spaces.
Included Labor: Securing necessary local building permits; coordinating a complete power disconnect with your local utility company; safe removal and structural disposal of the old panel; structural mounting of a premium 100A, 150A, or 200A main service panel; installing a new whole-house main service disconnect breaker; updating the home’s structural grounding system (including driving new grounding rods and bonding water pipes); splicing and terminating all existing home branch circuits neatly into the new panel; labeling every breaker precisely; and coordinating the final municipal electrical inspection.
🚨 AFCI & Existing Wiring Disclaimer: National Electrical Code (NEC) building codes mandate that upgrading a main panel requires switching to modern Arc-Fault Circuit Interrupter (AFCI) safety breakers. If older sections of the home contain pre-existing wiring issues—such as shared neutrals, bootleg grounds, knob-and-tube decay, or crowded junction boxes—these highly sensitive breakers will trip immediately. Homeowners must understand that upgrading a panel can expose these hidden flaws, resulting in sections of the home needing to be rewired or corrected at an additional cost. [Your Business Name] is not liable for pre-existing legacy wiring conditions.
🚨 Scope Note: Pricing includes the wholesale replacement and structural upgrade of the central panel housing and grounding system only. It does not include running brand-new individual branch circuits or appliance lines throughout the house. If a new circuit run back to the breaker panel is required, please see the New Circuit Run line item below.

New Circuit Run & Conduit Installation | $150 – $1,800+ per run

Establish entirely new electrical pathways or upgrade existing lines directly from your main electrical panel or subpanel to a new location.

Best For: Adding a brand-new appliance line, expanding outlets to a blank wall, replacing degraded framing wires, or running high-amperage 60-amp to 120-amp subpanel feeder wiring.
Included Labor: Installing an appropriately sized single or double-pole circuit breaker into your panel; mapping a structural path; pulling heavy-duty branch wiring or heavy-gauge copper/aluminum commercial-grade feeder cables through newly installed surface conduit (EMT), liquid-tight whips, or attic spaces directly to the target room box or subpanel enclosure.
Pricing Factors: Simpler branch line extensions through open framing fall into the $150 – $350 tier, while heavy dedicated panel home runs span $450 – $850. The overall range scales up to $1,800 based on attic space accessibility, high-amperage subpanel lines requiring thick-gauge conductors, core-drilling through concrete, underground trenching, and whether interior finished walls must be opened to fish lines.
🚨 Sheetrock Disclaimer: Please note that we do not perform sheetrock repair, patching, or painting. Any wall restoration required after opening up finished sheetrock to fish wires is the sole responsibility of the homeowner.

🛡️ Why Choose a Licensed Electrical Contractor?

Industrial Receptacle Safety: Electric vehicles pull massive, continuous power for hours at a time. Standard $10 hardware-store outlets will melt under this stress. We exclusively install heavy-duty, industrial-grade receptacles built to handle continuous maximum thermal expansion.
Load Calculation & Fire Prevention: EV chargers push your home panel closer to its limit than almost any other appliance. We calculate your panel's current load capacity before installing hardware, ensuring your system remains 100% safe from overheating risks.
GFCI Code Compliance: Local building codes require specific GFCI protection layouts for garage and outdoor EV charging points. We ensure your breakers and outlets match local safety laws perfectly so your installation easily passes home inspections.